Bygningsfejl

The orientation of the oval indicates which axis is more in focus, and thus which direction the lens needs to move. A square arrangement of only four sensors can observe this bias and use it to bring the read lens to best focus, without having to be fooled by oblong pits or other features on the disc surface. Astigmatic, distorted surfaces potentially introduce serious degradations in optical system performance.

• The KudoZ network provides a framework for translators and others to assist one another with translations or explanations of terms and short phrases.
• This plane is called either the sagittal meridional plane or, confusingly, just the sagittal plane.
• To control the way the ink pools and at what strength, spread the dye round the area using a brush.
• The foremost is a third-order aberration, which occurs for objects away from the optical axis.
• used.

Information on Disposal in other Countries outside the European Union This symbol is valid in europe. If you want to discard this product, please contact your neighborhood authorities or dealer and ask for the correct approach to disposal.  Wiping the 3D Eyewear with a soft cloth that is covered in dust or dirt may scratch the eyewear.  Usually do not use benzene, thinner, or wax on the 3D Eyewear, as doing this could cause the paint to peel off.

File Usage On Other Wikis

Reportedly, one night while touring in Florida he dismissed his regular band , then invited the opening group, the Webs, to become listed on him on tour, adopting the Candy Men name. One person in the Webs was singer/songwriter Bobby Goldsboro. The KudoZ network provides a framework for translators among others to assist each other with translations or explanations of terms and short phrases.
This plane contains the chief ray, but will not contain the optic axis. It is therefore a skew plane, basically not just a meridional plane. Rays propagating in this plane are called sagittal rays.

 If difficulty, take it off with the tip of the driver. Replacing battery Once the battery is running low, the indicator lamp flashes 5 times on turning the 3D Eyewear on. In this case, early battery replacement is recommended.  Dispose of the old batteries as non-burnable rubbish, or in line with the waste disposal regulations in where you live. Remove the battery cover using pen tip or screwdriver , etc. About 3D Eyewear Do not drop, exert pressure on, or step on the  3D Eyewear.

Oh No, There’s Been An Error

We are a non-profit group that run this service to share documents. We need your help maintenance and improve this site. Please get rid of this item only in designated national waste electronic collection schemes, rather than in the ordinary dust bin. The registration is automatically released in the event that you allow a lot more than 1 minute to elapse. Set the registration with the television and connected 3D Eyeware placed as close to each other as you possibly can. Replace the battery (coin-shaped lithium battery CR2025).

 Usually do not dunk the 3D Eyewear in liquid such as for example water when cleaning.  Avoid storing the 3D Eyewear in hot or highly humid locations.  As the liquid crystal shutters are fragile and easily broken, be careful when cleaning them. Incorrect installation may cause battery leakage,  corrosion and explosion.

Astigmatism may be corrected with eyeglasses, contact lenses, or refractive surgery. Various considerations involving ocular health, refractive status, and lifestyle frequently determine whether one option could be better than another. In those with keratoconus, toric contacts often enable patients to attain better visual acuities than eyeglasses.
little lighter than the full strength could have been. Using Precautions Usually do not drop or bend the 3D Eyewear.  Usually do not apply pressure to or scratch the surface of  the liquid crystal shutter of the 3D Eyewear. Usually do not use devices (such as mobile phones  or personal transceivers) that emit strong electromagnetic waves close to the 3D Eyewear as this might cause the 3D Eyewear to malfunction. Do not use 3D Eyewear beyond your specified usage  temperature range . If the room is lit by fluorescent lights and  light appears to flicker when using the 3D Eyewear, switch off the fluorescent light. 3D content will never be correctly visible if the  3D Eyewear is worn upside down or back-to-front.
The foremost is a third-order aberration, which occurs for objects from the optical axis. This form of aberration occurs even when the optical system is perfectly symmetrical.
Usually do not wear the 3D Eyewear when watching  anything other than 3D images. Other forms of displays (such as computer screens, digital clocks, or calculators etc.) may be difficult to see while wearing the 3D Eyewear. Using radio waves  This unit uses the two 2.4 GHz radio frequency ISM band (Bluetooth®).