What are the requirements for safety glasses?

Employees must use appropriate eye or face protection when exposed to eye or face hazards. But generally, a watch injury should be regarded as a serious injury. In the event of an incident, you have to assess what happened and know what first aid must be administered until emergency services can arrive. Rockland Precision Safety Glasses certainly are a step up with the same features as the Contractor Grade glasses but with added comfort. These glasses feature flexible rubber nose pads, rubber-tipped arms, and a lightweight design which allows for comfortable, all-day wearability.
Listed below are some hazards that employees could be exposed to when protecting the eyes and face. Personal eye protection ought to be the last type of defense against hazards. All efforts should be designed to eliminate any hazards at the foundation. Plumbing – Plumbing contractors are in risky of impact, splash, and potentially dust/atmospheric hazards. Construction – Generally, construction industry workers require protection from debris and impact, however they may also require splash protection and dust resistance depending on the work. When people think about hazards to your eyes, they think of flying debris and objects, but hazards can be found in all shapes and forms.
The ANSI Z87.1 standard requires efficient and easy-to-understand lens and frame markings. These markings, the following, make the selection process more straightforward and increase compliance. Welding shields protect eyes from burns caused by infrared or intense radiant energy.

  • Equipment fitted with appropriate filter lenses can be used to protect against light radiation.
  • Choose the darkest shade that allows adequate task performance.
  • Protective eyewear is necessary when employees face flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases, vapors and light radiation.
  • Make sure to choose the ANSI-rated polycarbonate lens material.

The ball weighs 43 grams and is dropped at a speed of 18 km per hour. Glasses in this category are deemed EN 166S if they do not shatter and stay in the frame itself, which also must remain intact. This test will ensure that your glasses withstand plenty of blunt force should the need occur. The EN 166 standard is a broad category that covers several different types beneath it, all covering different elements of protection under its umbrella.

Prescription safety glasses shall have identification on the lens or frames to be acceptable as safety eye wear. Many safety goggles or plano (non-prescription) safety glasses fit comfortably over street eyewear and will provide satisfactory protection without impairing the fit of the prescription eyewear. Prescription safety glasses with side protection can be found, but do not drive back splashes or droplets and goggles.
​For employees that additionally require vision corrective lenses, the prescription safety lenses must be ANSI rated.
They are able to accept prescription polycarbonate lenses that adhere to the ANSI Z87.1 standard. Additionally, they feature a replaceable nose bridge and dust dams. Additional product testing has been added for dust and mist goggles as well as chemical splash goggles and visors. Standard safety glasses are made to protect against light to moderate impact and flying particles and so are made of metal or plastic with impact-resistant glass or plastic lenses. Welder’s goggles provide protection from sparking, scaling, or splashing metals and harmful light rays. Lenses are impact resistant and are available in graduated lens shades.
Safety goggles are tight-fitting eye protection that completely cover the eyes, eye sockets and the facial area round the eyes and provide protection from impact, dust,, mists, and splashes. Safety eyewear can be worn over prescription lenses and should not disturb the proper position of other safety apparel. Additionally, it’s worth taking into consideration that maybe safety glasses aren’t the right PPE for the job. There are many things to consider when purchasing safety glasses on your own or your employees.
OSHA “direct final rule” cadence incorporating industry requirements from prior years suggests future changes as the consensus evolves. Companies would do well now to consider the newer2015 versionof ANSI/ISEA Z87.1 while referencing the recently incorporated 2010 version. Manufacturers adhering to ANSI/ISEA Z87.1 will be keeping pace with new testing and marking specifications. That said, it takes time and energy to deplete existing inventory, test, adapt, manufacture and distribute new models. Changes are gradual which is the key reason why OSHA is adopting the 2010 standard now, in 2016. As a worldwide safety science leader, UL helps companies to demonstrate safety, enhance sustainability, strengthen security, deliver quality, manage risk and achieve regulatory compliance. Protection from optical radiation is directly related to filter lens density.

Following OSHA rules on PPE is the better way to prevent eye and face injuries. Doing four things can minimize any workplace hazards and keep employees’ eyes and face safe from injury. Michael Eldridge is really a US Marine Veteran and the founder of SafetyGlassesUSA.com. He’s passionate about protective eyewear and promoting vision safety.

Similar Posts